Home
Brands
NANOFLOW MAX
  • NANOFLOW MAX
  • NANOFLOW MAX Opened
  • NANOFLOW MAX
  • NANOFLOW MAX
  • NANOFLOW MAX
  • NANOFLOW MAX
  • NANOFLOW MAX

NanoFlow Max

101-190911001
Fremco

Fiber blowing machine for FTTH fibers (EFBU) and micro cables up to 4.5 mm.

Small but powerful fiber blowing machine, which can blow both blown fibre (EPFU) and micro/nano cables. Tested in accordance to IEC standards.

  • Fiber/Cable OD: 0.8-4.5 mm;
  • Duct size OD: 3.0-12.7 mm;
  • Preparation time: 3 min;
  • Blowing distance: Up to 1200 m.
Description

Adjustable clamping force 

Secures grip around cable/fiber during installation.

Tool free installation

Easy to open and close by hand with quick load of fiber and duct. Adjustable speed and torque. Battery-powered (independent of 100V/240V).

LED display 

Showing speed, distance, fiber protection and battery information.

Unique fiber protection technology

If the maximum recommended load on the fiber exceeds the preset torque, the machine stops the blowing process immediately without damaging the fiber.

Tested in accordance to IEC standards

 

Kit contains: 
  • 2 x 24V 2.0 Ah Lithium-ion battery with quick charger
  • Filter and water separator
  • 1 adaptor plate set.
  • MAX steel drive wheel for fibers +3 mm
  • Steel drive wheel for fibers 0.8-3 mm
  • Drive wheel for fibers 0.8-3 mm
  • Duct adaptors for 3, 5, 7, 8, 8.5, 10, 12, 12.7 mm
  • Quality transport box

 

Possible accessories: 
  • Service Agreement with Extended Warranty
  • Tripod with quick adaptor (Item No.: 103-161127005)
  • Shoulder strap (Item No.: 103-160601074)
  • Reel holder arm for pre-connected fiber (Item No.: 103-171020001)
  • A wide selection of adaptor plates for any fiber/duct sizes on request
Product Details
101-190911001

Data sheet

Dimensions
212L x 104W x 139H mm
Weight
3.5 kg
Application of blowing machine
FTTH
Type of blowing machine
110/230V
Fiber/Cable OD
0.8 - 4.5 mm
Duct outer diameter
3 - 12.7 mm
Blowing distance
up to 1 200 m
Blowing speed
Up to 125 m/min
Pushing force
0-2 kg
Recommended pressure and airflow
Max. 10 bar (200 l/pr. min.)
Attachments
Download
NanoFlow_Max_Datasheet_EN

Nanoflow Max Datasheet, EN, 03.01.2022

Download (643.49KB)
Comments (0)
Grade
No customer reviews for the moment.
8 other products in the same category:
Fremo PowerFlow Rapid Quick view

Reference: 101-40001

Brand: Fremco

PowerFlow Rapid

(0)
The PowerFlow RAPID is easy to operate and designed for rough conditions. This hydraulic machine can blow a large variety of larger cables, fibers and ducts. Fiber/Cable OD: 5.5-25 mm; Duct size OD: 10-63 mm; Preparation time: 8-10 min; Blowing distance: up to 5 000 m; Floating distance (with water): up to 10 000 m.
More
PicoFlow Rapid Quick view

Reference: 101-231211100

Brand: Fremco

PicoFlow Rapid

(0)
Handheld fiber blowing machine for FTTH fibers and micro cables up to 3 mm. Perfect for installers with the occasional job or for experienced installers who need to blow a short distance to finish up a job. Fiber/Cable OD: 0.8-3.0 mm; Duct size OD: 3.0-12.7 mm; Preparation time: 3 min; Blowing distance: Up to 500 m.
More
Fremco MiniFlow Rapid Quick view

Reference: 101-10031

Brand: Fremco

MiniFlow Rapid

(0)
Hydraulic cable blowing machine with a built-in electronic counter and cable damage safety monitoring system. Fiber/Cable OD: 3-12 mm; Duct size OD: 7-20 mm; Preparation time: 4 min; Blowing distance: up to 3 500 m.
More
Fremco MicroFlow LOG Quick view

Reference: 101-171001001

Brand: Fremco

MicroFlow LOG

(0)
Fiber blowing machine for FTTH fibers (EPFU) and micro cables up to 6.5 mm Compatible with OptiCloud, the MicroFlow LOG is making work easier for network owners, contractors and installers. Fiber/Cable OD: 0.8-6.5 mm Duct size OD: 4-16 mm Preparation time: 5 min Blowing distance (with air): Up to 2500 m
More
MultiFlow Rapid Single cable Quick view

Reference: 101-40021

Brand: Fremco

MultiFlow Rapid Single cable

(0)
Cable blowing machine for backbone. Optimal for relining. MultiFlow RAPID is designed for relining of multiple micro ducts, but it can also be operated for single cables. Fiber/Cable OD: 5.5-25 mm; Duct size OD: 10-63 mm; Preparation time: 8-10 min; Blowing distance: up to 5 000 m; Floating distance (with water): up to 10 000 m.
More
MicroFlow Touch Quick view

Reference: 101-10051

Brand: Fremco

MicroFlow Touch

(0)
Fiber blowing machine for FTTH fibers (EFBU) and micro cables up to 6.5 mm. Fully automatic fiber blowing machine that secures fast and reliable optical fiber blowing. Designed for air blown fiber and small fiber optic cables.  Fiber/Cable OD: 0.8-6.5 mm;  Duct size OD: 4-16 mm;  Preparation time: 5 min;  Blowing distance (with air): Up to 2500 m.
More
MultiFlow Rapid Single cable Quick view

Reference: 101-40002

Brand: Fremco

MultiFlow Rapid for Relining

(0)
Cable blowing machine for backbone. Optimal for relining. MultiFlow RAPID is designed for relining of multiple micro ducts, but it can also be operated for single cables. Fiber/Cable OD: 5.5-25 mm; Duct size OD: 10-63 mm; Preparation time: 8-10 min; Blowing distance: up to 5 000 m; Floating distance (with water): up to 10 000 m.
More
DuctRod RAPID Quick view

Reference: 101-220106002

Brand: Fremco

DuctRod RAPID

(0)
Designed to push a duct rod into an underground duct. It is equipped with a flexible clamping unit, allowing you to attach the machine to the sidewall of the manhole securing more stable installation. Rod OD: 9-25 mm Duct size OD: 10-40 mm Preparation time: 2-4 min Pushing Distance: up to 500 m
More
You might also like
Lubricant FlowLUB 5000 Quick view

Reference: FL5000

Brand: Fremco

Lubricant FlowLUB 5000, 12 btl. box

(0)
Special lubricant for fiber cable and micro cable installation.  Lubrication (FlowLUB) are water based lubricants for all ducts and cables. The lubrication greatly reduces friction and static electricity. FOR NANOFLOW MAX, MICROFLOW, EASYFLOW SMART and MINIFLOW
More